Preparing your SolarGabay experience…

Inihahanda ang iyong karanasan sa SolarGabay…

Restoring your language and opening this page. Ibinabalik ang iyong wika at binubuksan ang pahina.
Skip to main content

Solar battery and brownout planning

A battery should be sized from the appliances that must stay on, their combined running and surge power, the required outage duration, usable depth of discharge, conversion losses, and a reserve margin.

Direct answers to the main questions

Does grid-tied solar work during a brownout?

A standard grid-tied inverter normally shuts down when the grid fails. Backup requires compatible equipment, isolation, storage or another supported source, and a designed backup circuit.

Should every appliance be backed up?

Usually no. Prioritize communications, lighting, fans, refrigeration, medical needs, pumps, and work equipment, then verify surge requirements.

Battery or generator?

The decision depends on outage duration, noise, fuel access, maintenance, startup behavior, critical loads, and how often outages occur. Some properties use both.

Read the supporting guides

Use the tools with the same assumptions

Keep bill history, electricity rate, daytime use, shading, target, and equipment assumptions consistent. Changing one input between tools can make the outputs look contradictory even when each calculation is working as designed.

Inspect the Philippine reference data

See which utility periods and solar-yield ranges support the planning defaults, where coverage is limited, and when a manual override is more appropriate.

Open the data explorer

Sources, scope, and limits

This hub organizes educational content and does not replace a site survey, electrical design, structural review, current utility confirmation, or a complete written quotation.