Preparing your SolarGabay experience…

Inihahanda ang iyong karanasan sa SolarGabay…

Restoring your language and opening this page. Ibinabalik ang iyong wika at binubuksan ang pahina.
Skip to main content

Frequently asked Philippine solar questions

Start with the short answer, then open the detailed guide or calculator that explains the assumptions, evidence, and next decision.

How much does solar cost in the Philippines?

There is no reliable single price. Total cost changes with system size, exact equipment, battery capacity, roof work, protection devices, permits, monitoring, warranties, and written scope. Compare complete quotations using the same assumptions.

Read the detailed answer

How many solar panels does a Philippine home need?

Start with several months of kWh use, choose a realistic target offset, estimate local production and system losses, then check panel wattage, roof area, shading, orientation, and inverter limits.

Read the detailed answer

Can grid-tied solar work during a brownout?

A standard grid-tied system normally shuts down when the grid fails. Backup requires compatible equipment, isolation, storage or another supported source, protected circuits, and a design for the intended loads.

Read the detailed answer

Is a battery required for solar?

Not for every system. Grid-tied solar can reduce daytime imports without a battery. A battery is considered when backup, time shifting, off-grid operation, or other defined goals justify the added cost and replacement planning.

Read the detailed answer

How long is the solar payback period?

It depends on installed cost, actual annual savings, maintenance, financing, equipment replacement, rate changes, production, and how much solar energy is used directly. Treat payback as a range, not a guarantee.

Read the detailed answer

How does net metering work?

An eligible system follows applicable rules and the distribution utility process for technical review, agreements, inspection, and metering. Current forms, fees, timelines, and credit treatment must be verified with the utility and official issuances.

Read the detailed answer

How should homeowners compare installer quotations?

Use the same project brief and normalize capacity, exact models, quantities, production assumptions, warranties, exclusions, permits, payment milestones, monitoring, and after-sales responsibility. Clarify missing or conflicting fields before choosing.

Read the detailed answer

Can a monthly electricity bill determine solar size?

It is a starting point, but kWh, actual blended rate, bill history, daytime use, roof limits, shading, target reduction, and production assumptions are needed for a stronger estimate.

Read the detailed answer

How can I check a solar installer?

Confirm business identity, current contact details, service area, exact equipment, site-survey process, electrical and structural responsibilities, permits, warranties, payment terms, monitoring, and after-sales channels. A directory listing is not an endorsement.

Read the detailed answer

When might solar not be worthwhile?

Solar may be a weak fit when the roof is unsafe or heavily shaded, daytime consumption is very low, ownership is short, financing is expensive, the proposal is incomplete, or other efficiency work solves the problem more directly.

Read the detailed answer

Use answers as a starting point

Actual design, utility requirements, equipment compatibility, roof condition, permits, and written responsibilities require current site-specific verification.